Large Standing Fans

Home / Products / Large Standing Fans

Large Standing Fans

  • This 3.3 m green large standing fan is specified for shopping malls and supermarkets where air conditioning coverage does not reach the full sales floor and corner zones remain warm. In large retail spaces, the cooling system serves the main aisles but leaves perimeter and corner areas at a different temperature, which affects customer experience in those zones. This model delivers air at a wide angle over a long throw distance, so the airflow covers a large sales floor area and balances temperature across the retail space. Dimensions are 3300 by 3300 by 3280 mm. Maximum airflow output is 3800 cubic meters per minute. Power is 500 W with an Permanent magnet motor and four speed settings. Color is green. Price please consult.

    Product Details
  • This 3.3 m yellow large standing fan is specified for indoor sports venues where the building volume is large, the ceiling is high, and temperature varies between the court area and the spectator zones. In a sports hall, relying on the air conditioning system alone to serve the full volume carries a high energy cost, and the temperature difference between zones remains noticeable. This model builds three-dimensional air circulation across the venue floor, which balances temperature across the whole space. The unit is specified for low-noise operation so it does not interfere with matches, announcements, or event audio. Dimensions are 3300 by 3300 by 3280 mm. Maximum airflow output is 3800 cubic meters per minute. Power is 500 W with a permanent magnet motor and four speed settings. Color is yellow. Price please consult.

    Product Details
  • This 3.3 m red large standing fan is specified for outdoor restaurant seating and food service patio areas where no fixed ventilation infrastructure is available and summer heat reduces customer seating time. Outdoor spaces are open to direct sun and radiant heat from surrounding surfaces, and the absence of a building envelope means the cooling load cannot be addressed by indoor systems. This model delivers a wide-angle, long-distance soft circulating airflow that lowers the perceived temperature across the outdoor seating area. Dimensions are 3300 by 3300 by 3280 mm. Maximum airflow output is 3800 cubic meters per minute. Power is 500 W with an Permanent magnet motor and four speed settings. Color is red. Price please consult.

    Product Details
  • This 3.6 m white large standing fan is specified for commercial plazas, cultural tourism scenic areas, and outdoor pedestrian districts where the equipment is used over long periods and is expected to serve more than ventilation alone. In these locations, a single-purpose outdoor unit means separate procurement for lighting, signage, or advertising carriers, which adds to site clutter and installation work. This model supports multiple add-on configuration options, so one unit can address ventilation plus additional site functions as required. Dimensions are 3600 by 3600 by 3280 mm. Maximum airflow output is 3800 cubic meters per minute. Power is 500 W with an Permanent magnet motor and four speed settings. Color is white. Price please consult.

    Product Details
  • This 3.6 m black large standing fan is specified for construction sites, temporary work sheds, and work areas where the site layout changes during the project. Fixed ventilation equipment cannot be repositioned when workstations are relocated, so airflow coverage is lost each time the site layout changes. This model uses a floor-standing structure with a mobile base, so the unit can be moved when the work area shifts. It is specified for temporary and dynamic work zones where the ventilation position must follow the work. Dimensions are 3600 by 3600 by 3280 mm. Maximum airflow output is 3800 cubic meters per minute. Power is 500 W with an Permanent magnet motor and four speed settings. Color is black. Price please consult.

    Product Details
  • This 3.6 m green large standing fan is specified for exhibition centers and transportation hubs where occupant flow changes through the day and across seasons. In these venues, a fixed fan speed either wastes energy during low-traffic periods or provides insufficient air movement during peak periods. This model uses a permanent magnet motor with stepless speed regulation, so airflow output can be adjusted continuously to match the actual occupancy level. During peak flow, circulation is increased; during off-peak periods, rotational speed is reduced. Dimensions are 3600 by 3600 by 3280 mm. Maximum airflow output is 3800 cubic meters per minute. Power is 500 W with an Permanent magnet motor. Color is green. Price please consult.

    Product Details
  • This 3.6 m yellow large standing fan is specified for large public venues and industrial parks where multiple units are installed across one site and manual operation of each unit creates a management burden. When fans are distributed across separate buildings or zones, staff must visit each unit to start, stop, or adjust speed, which raises labor cost and makes it difficult to coordinate airflow across the site. This model can be connected to an intelligent centralized control scheme, so multiple units are managed remotely from one interface. Speed adjustment and power on or off are issued to the group rather than to each unit individually. Dimensions are 3600 by 3600 by 3280 mm. Maximum airflow output is 3800 cubic meters per minute. Power is 500 W with an Permanent magnet motor and four speed settings. Color is yellow. Price please consult.

    Product Details
  • This 3.6 m red large standing fan is specified for industrial and commercial sites where the unit runs under high load for extended periods and maintenance frequency is a cost concern. In these environments, equipment is switched on for most of the operating year, and units with a high count of wearing parts require frequent service that interrupts normal operations. This model uses a motor with IP68 protection level and a simplified internal structure, which reduces the number of wearing parts and supports stable operation under high-load conditions. Dimensions are 3600 by 3600 by 3280 mm. Maximum airflow output is 3800 cubic meters per minute. Power is 500 W with an Permanent magnet motor and four speed settings. Color is red. Price please consult.

    Product Details
APT Energy Saving Technology (Yangzhou) Co., Ltd.

APT Energy Saving Technology (Yangzhou) Co., Ltd. APT Energy Saving Technology (Yangzhou) Co., Ltd. is a professional industrial equipment service provider that focuses on the field of industrial ventilation equipment, integrating R&D, sales, and installation. The company is located in Building 2, Zone A of the Electronic Information Industrial Park in Nanyang New District of Gaoyou City, covering an area of 20,000 square meters. It currently has a team of 75 people and is dedicated to providing efficient and energy-saving ventilation solutions for high-rise space scenarios.
Since its establishment in 2025, the company has always adhered to the business philosophy of "exquisite design, lean manufacturing, and sincere trust", deeply engaging in the technical research and application of super-large industrial fans (industrial large ceiling fans). Leveraging modern aerodynamics principles, absorbing international cutting-edge technologies, introducing the manufacturing process of super-large streamlined fans from the United States, combining German imported core components, and optimizing them based on local on-site working conditions such as factory buildings and warehouses. Each product undergoes precise fluid dynamics calculations, simulates natural airflow, creates a comfortable and gentle breeze sensation, and balances excellent performance with high cost-effectiveness, creating a highly effective new generation of super-large industrial ceiling fans.
APT focuses on the ventilation and cooling needs of high-rise spaces. Relying on mature technical strength and a complete installation service system, it provides stable and reliable energy-saving ventilation equipment and one-stop on-site services for various industrial factories, warehousing logistics, large venues, etc. We adhere to quality as the foundation, are guided by customer needs, continuously iterate product technologies, and help enterprises improve workshop environments and reduce ventilation energy consumption, working hand in hand with customers to achieve green and energy-saving production.

Certificate Of Honor
  • CE Certificate
News Update
Message Feedback
  • submit
Large Standing Fans Industry knowledge